Normalerweise offene Magnetventile zur direkten Ansteuerung nbr buna viton fkm ptfe teflon epdm

Normally open 2-way solenoid valves with direct control

Main components: body with main orifice, quill assembly + movable core + rod + seal holder assembly (kit normally open), coil.

Operation:

The normally open 2-way solenoid valves with direct control have an inlet fitting and a fitting for use. By moving the rod through the rod, the movable core opens and closes the solenoid valve. When the coil is not powered, the seal holder, under the action of a spring, is kept in a position such that the orifice is open, allowing the passage of the fluid.

When, on the other hand, the coil is powered, the mobile core moves downwards and, through the dipstick, pushes the gaskets in a position such as to close the orifice, not allowing the passage of the fluid.

Note:

In this family of solenoid valves, an increase in pressure causes an increase in the force required to open the valve: if the difference in pressure between the supply and use is greater than the maximum value for which it was designed the solenoid valve, the latter may not reopen even with the coil de-energized.

21A3ZV15D 21A3ZV20D 21A3ZV20G 21A3ZV25D 21A3ZV25G 21A3ZV30G 21A3ZV45D 21A3ZV45G 21A2ZV15D 21A2ZV20D 21A2ZV20G 21A2ZV25G 21A2ZV30G 21A2ZV45D 21A2ZV45G 21A2ZV55D 21A2ZV55G 21A3Z15TD 21A3ZT20D 21A3ZT20G 21A3ZT25D 21A3ZT25G 21A3ZT30G 21A3ZT45D 21A3ZT45G 21A2ZT15D 21A2ZT20D 21A2ZT20G 21A2ZT25G 21A2ZT30G 21A2ZT45D 21A2ZT45G 21A2ZT55D 21A2ZT55G 21A3ZB15D 21A3ZB20D 21A3ZB20G 21A3ZB25D 21A3ZB25G 21A3ZB30G 21A3ZB45D 21A3ZB45G 21A2ZB15D 21A2ZB20D 21A2ZB20G 21A2ZB25G 21A2ZB30G 21A2ZB45D 21A2ZB45G 21A2ZB55D 21A2ZB55G 21A3ZE15D 21A3ZE20D 21A3ZE20G 21A3ZE25D 21A3ZE25G 21A3ZE30G 21A3ZE45D 21A3ZE45G 21A2ZE15D 21A2ZE20D 21A2ZE20G 21A2ZE25G 21A2ZE30G 21A2ZE45D 21A2ZE45G 21A2ZE55D 21A2ZE55G 

There are 12 products.

Showing 1-12 of 12 item(s)

Active filters